Unfortunately, seating a hot pot on a wooden table can make white heat spots. These signs are ugly and can get more ominous if not negotiated quickly. The signs of heat are the moisture that must be removed from the wood. There are particular techniques for getting rid of white heat marks on wood, which use widespread household items. If you don’t face these types of problems, you can use the white table that you will find in online shops.

However, the following techniques can be used to remove white heat marks. Give it a try; try all of them to discover the most suitable way to work for your requirements. Be assured to use any technique on furniture, walls, countertops, or invisible parts of the base to avoid damaging the wood cover.

Items You Will Require

• Wooden table treats
• Wood finish
• Old iron
• Lemon oil
• Baking soda
• Mild soap and water
• Brushing teeth like ointment
• Anger

Step by Step Guidelines

Step 1

Wash the treated surface. Wash it off with mild soap and water. After washing, swab the zone with a smooth, hygienic cloth and dry well. You can utilize a pure white cotton cloth to lay soap and water solutions on the exterior.

Step 2

Utilize an old iron set over heightened parched warmth and place it over the white heat mark. You can put the sizzling iron on the towel directly above the stain. While using heat, you need to be cautious as it can cause warp and excess drying.

Applying steam to the spot will operate quickly and more efficiently but be fast to apply moisture to the wood. Use the mist method for tough and old stains in other color dumping methods.

Step 3

Drive your hands over the exterior to see if you can clear all the stains on the wood. If there are more colors on the wood, you can replicate the steps for this procedure.

Use the timber finish after you remove the white heat spots.

Additional Tips and Advice

Using Lemon Oil

Use lemon oil to pull stains. Lemon oil is an excellent cleaner and stain remover; it can be used for stains and blemishes and will be capable of removing stains efficiently. Place the lemon oil on a little clean cloth and wipe directly over the stain. Massage a petite till the stain isn’t removed. Clean the area with another dry cloth.

Using Baking Soda

Utilize baking soda to clear white spots. Another famous and adequate cleaning agent is baking soda. It can clear patterns and help restore the looks of wood. Create a paste with the same amount of water and baking soda in a small bowl. Mix it well and apply it to the stain. Depart the paste on the spot and remove it after 5-10 minutes. Clean the area with a smooth, clean fabric.

Using Toothpaste

Manipulate toothpaste to extract pigments and spots. Toothpaste holds baking soda, which helps in removing stains. Just use a small amount to the mark using the tip of your finger. Rub circularly and wipe with a damp cloth. Repeat the steps if you still see white spots on the regaled spot.

Concluding Remarks

Signs of white heat are also signs of water and moisture, which can be extracted by heating the place. Nevertheless, older marks can take some time to release and may demand light scrubbing or sanding to be removed entirely. Always check an assortment or solution before applying it to the zone to be regaled.